ZSPEH&ZSPEP Momentary Push Button Switch
- Activates only while pressed
- Quick response tactile feedback
- Available with or without LED
- Customizable cap design
- Applications: Reset buttons, test triggers, user input interfaces
- General Specifications
- Circuit/Contacts DPDT
- Switching rating 30V DC @ 100mA
- Terminal Through hole(TH)
- Total travel 1.5mm ± 0.5mm (full stroke); 1.0mm ± 0.5mm (lock stroke)
- Operating force 250gf ± 100gf (Lock); 150gf ± 100gf (Momentary)
- Mechanical life 10,000 cycles min.
- Front protection IP4X
- Illumination illuminated
- Materials
- Cap/Lens Cap: ABS ; Lens: PC(Polycarbonate)
- Stem/Reflector POM(Polyoxymethylene)
- Base/Housing Base: PA(Polyamide) ; Housing: ABS
- Terminal PBS (Phosphor bronze) with Silver plating
ZSPEH - Dimension & Circuit Diagram & PCB Layout
Without LED
L1 Single LED
L2,L3,L4,L5 Single LED
L6 Single LED
Q: What is a momentary switch used for?
A: It sends a signal only while pressed, ideal for temporary actions like resets or triggers.
ZSPEP - Dimension & Panel cutting & Option
Recommend add resistor to limited each LED forward current at 20mA
Panel cutting: □14.1mm
Panel thickness: 1.0~1.2mm
Option: Cable: YCW030-A
Cable:UL1571#28AWG
Conductor pitch : 1.25mm
Conductor width : □0.3mm
